Cross-laminated timber (CLT) floors are increasingly used in long-span buildings as a greener alternative to reinforced concrete, steel and their composites. Despite high stiffness, relatively low mass of CLT makes such floors prone to pedestrian-induced vibrations. While these vibrations do not threaten structural integrity and safety, they often ...

By Marija Nefovska-Danilović, Vitomir Racić, Marija Milojević, Marko Popović, Radovan Cvetković, Miroslav Marjanović

The reuse of structural steel elements is an effective strategy for reducing the environmental impact of construction. However, the practical application of reclaimed steel members may be limited by geometric incompatibilities between existing member dimensions and the requirements of new structural systems. The possibility of adjusting the effecti...

By Isidora Jakovljević, Jelena Dobrić, Nina Gluhović, Milan Spremić, Aljoša Filipović

This paper investigates the fatigue performance of a hybrid transitional joint in an I-girder stiffener using DED-Arc AM46 steel from a material and detail perspective. High-cycle fatigue (HCF) tests were performed on machined/polished specimens extracted in horizontal and vertical directions relative to the welding beads. The obtained results were...

By Dženisa Šaini, Ricardo Branco, David Andrade, Mariela Mendez-Morales, João Pedro Martins, Luís Simões da Silva

Arheološka istraživanja Zapadnog podgrađa tvrđave Golubački grad otkrila su niz objekata i nalaza iz različitih epoha koje je bilo neophodno adekvatno pripremiti, adaptirati i sanirati, kako bi se obezbedila njihova trajnost, sigurnost i dostupnost posetiocima. U ovom radu je predstavljena sanacija objekata Rimske kuće i Turskog hamama, koja...

By Boško Stevanović, Marija Todorović, Vedran Carević, Tijana Jovović

Stari konak manastira Bogovađa sazidan je 1858. god. u obliku ćiriličnog slova ,,P,,  dužine 31.50 m, širine do 11.60 m srednji brod, a paralelni brodovi su 21.00 m x 8.40 m. Ima 1/3 suteren visine 3.20 m i prizemlje visine 3.80 m. Zidan je u opeci bez ojačanja. Od dejstva zemljotresa su nastala značajna oštećenja na zidovima pri...

By Nenad Krstivojević

This paper presents an assessment of the condition of the reinforced concrete structure of the stadium grandstands after many years of service and proposes recommendations to ensure its safe continued operation. The research focuses on deterioration of concrete and reinforcement in elements of the primary and secondary structural systems, including...

By Darko Živković, Predrag Blagojević, Jelena Bijeljić, Nemanja Marković, Aleksandar Šutanovac

U radu je prikazana uporedna analiza efikasnosti različitih vrsta premaza namenjenih zaštiti armiranobetonskih konstrukcija od karbonatizacije. Rezultati su zasnovani na seriji laboratorijskih ispitivanja uzoraka betona izloženih ubrzanoj karbonatizaciji, sprovedenih u skladu sa standardom SRPS EN 12390-12:2010, Ispitivanje očvrslog betona &...

By Nikola Uzunov, Ivan Ignjatović

This paper presents the main aspects of a comprehensive study of demountable steel-precast concrete connections consisting of a demountable bolt and embedded mechanical coupler with a rebar anchor. The study included experimental and numerical analysis of the connection under pure tension, pure shear, and combined shear and tension loading. The res...

By Ivan Milićević

Trenutno važeći Evropski standardi propisuju minimalne kriterijume za serklaže u zidovima uokvirenim serklažima, dok se zahtevi u pogledu unutrašnjih sila u njima uglavnom eksplicitno ne određuju. U ovom radu predstavljena je metodologija bazirana na podacima iz numeričkih analiza usmerena ka racionalnom dimenzionisanju serklaža prema realni...

By Nemanja Krtinić, Matija Gams, Marko Marinković

In recent years, 3D concrete printing (3DCP) technology has found growing application in residential construction, from single and two-storey houses to apartment buildings. Nevertheless, the wider application of this technology is limited by the lack of established standards and design codes, the development of which requires a sufficiently large e...

By Stefan Mitrović, Ivan Ignjatović