DATA–DRIVEN FINITE ELEMENT MODELLING OF STUB RECYCLED AGGREGATE CONCRETE-FILLED STEEL TUBE COLUMNS
Concrete-filled steel tubes incorporating recycled aggregate concrete represent a sustainable composite structural members in which the steel tube provides effective confinement and enhances column performance. Although the experimental database for such members has grown in recent years, robust high–fidelity numerical models remain limited. ...
By Jelena Nikolić, Nikola Tošić, Juan Murcia-Delso, Svetlana Kostić
RECLAIMED BEAM LENGTH ADJUSTMENT VIA INNOVATIVE AND TRADITIONAL STRUCTURAL JOINT SOLUTIONS
The reuse of structural steel elements is an effective strategy for reducing the environmental impact of construction. However, the practical application of reclaimed steel members may be limited by geometric incompatibilities between existing member dimensions and the requirements of new structural systems. The possibility of adjusting the effecti...
By Isidora Jakovljević, Jelena Dobrić, Nina Gluhović, Milan Spremić, Aljoša Filipović
MODAL TESTING AND VIBRATION MEASUREMENTS OF A FULL-SCALE CLT FLOOR
Cross-laminated timber (CLT) floors are increasingly used in long-span buildings as a greener alternative to reinforced concrete, steel and their composites. Despite high stiffness, relatively low mass of CLT makes such floors prone to pedestrian-induced vibrations. While these vibrations do not threaten structural integrity and safety, they often ...
By Marija Nefovska-Danilović, Vitomir Racić, Marija Milojević, Marko Popović, Radovan Cvetković, Miroslav Marjanović
NUMERICAL ANALYSIS OF A NON-SLENDER HIGH-STRENGTH CONCRETE BEAM USING ABAQUS
The shear design of non-slender reinforced high-strength concrete (HSC) beams remains questionable, as indicated by experimental findings. This paper aims to perform a numerical simulation of a non-slender HSC beam and compare the results with experimental data. A finite element model of the tested HSC beam was developed in Abaqus, incorporating th...
By Radmila Sinđić Grebović, Mina Grebović
ON DED-ARC HYBRID TRANSITIONAL JOINTS IN STRUCTURAL APPLICATIONS
This paper investigates the fatigue performance of a hybrid transitional joint in an I-girder stiffener using DED-Arc AM46 steel from a material and detail perspective. High-cycle fatigue (HCF) tests were performed on machined/polished specimens extracted in horizontal and vertical directions relative to the welding beads. The obtained results were...
By Dženisa Šaini, Ricardo Branco, David Andrade, Mariela Mendez-Morales, João Pedro Martins, Luís Simões da Silva
SANACIJA RIMSKE KUĆE I TURSKOG HAMAMA U OKVIRU TVRĐAVE GOLUBAČKI GRAD
Arheološka istraživanja Zapadnog podgrađa tvrđave Golubački grad otkrila su niz objekata i nalaza iz različitih epoha koje je bilo neophodno adekvatno pripremiti, adaptirati i sanirati, kako bi se obezbedila njihova trajnost, sigurnost i dostupnost posetiocima. U ovom radu je predstavljena sanacija objekata Rimske kuće i Turskog hamama, koja...
By Boško Stevanović, Marija Todorović, Vedran Carević, Tijana Jovović
IMPACT OF SOIL REPLACEMENT ON ROAD EMBANKMENT SETTLEMENT
This paper presents an analysis of consolidation settlement and consolidation time due to the construction of a road embankment on the Kratovska Stena–Lučani section. The study was performed for three representative sections between bridge structures, considering different embankment heights and subsoil improvement options. The analysed cases...
By Sanja Jocković, Nikola Obradović, Mladen Ćosić, Nenad Šušić
EFEKTI PRIMENE PROIZVODA ZA SANACIJU I ZAŠTITU AB KONSTRUKCIJA NA KARBONATIZACIONU OTPORNOST BETONA
U radu je prikazana uporedna analiza efikasnosti različitih vrsta premaza namenjenih zaštiti armiranobetonskih konstrukcija od karbonatizacije. Rezultati su zasnovani na seriji laboratorijskih ispitivanja uzoraka betona izloženih ubrzanoj karbonatizaciji, sprovedenih u skladu sa standardom SRPS EN 12390-12:2010, Ispitivanje očvrslog betona &...
By Nikola Uzunov, Ivan Ignjatović
SEISMIC ANALYSIS OF A DAMAGED RC TUNNEL FORM BUILDING IN TÜRKIYE
This paper analyses the seismic behaviour of a RC building with a tunnel structural system under seismic loading. This system is increasingly used in modern construction due to spatial rigidity and rapid construction; however, strong earthquakes, such as the one in Türkiye in 2023, have shown that even such buildings can sustain significant da...
By Jovan Starčević, Marko Marinković
REGRESIONI PREDIKTIVNI MODELI ZA DIMENZIONISANJE VERTIKALNIH SERKLAŽA U ZIDOVIMA UOKVIRENIM SERKLAŽIMA
Trenutno važeći Evropski standardi propisuju minimalne kriterijume za serklaže u zidovima uokvirenim serklažima, dok se zahtevi u pogledu unutrašnjih sila u njima uglavnom eksplicitno ne određuju. U ovom radu predstavljena je metodologija bazirana na podacima iz numeričkih analiza usmerena ka racionalnom dimenzionisanju serklaža prema realni...
By Nemanja Krtinić, Matija Gams, Marko Marinković